摘要--水草收割船液壓系統的設計

1、<p><b>　　摘 要</b></p><p>　　本次設計的題目是BYD-1水草收割船液壓系統的設計，水草收割船的動力來源是液壓，液壓系統控制船的行走、割臺的升降以及輸送裝置的運動。</p><p>　　液壓系統是由動力元件（液壓泵）、控制元件（液壓閥）、執行元件（液壓缸、液壓馬達）、輔助元件（油箱、油管、過濾器）等組成。在設計過程中每一部分都要經過

2、分析，篩選，畫出液壓系統原理圖。</p><p>　　在確定液壓系統原理圖前先確定液壓執行元件的形式，對系統進行工況分析，確定系統壓力，流量，功率等參數，制定基本的方案，再擬定液壓原理圖，然后根據國家標準，選擇合適的液壓元件，最后進行強度校核，編寫說明書。</p><p>　　關鍵詞：水草收割船； 液壓系統； 原理圖。</p><p><b>　　ABST

3、RACT</b></p><p>　　The subject of this design is BYD-1 plants harvested vessel hydraulic system design, Plants harvest the ship's power source is a hydraulic, Hydraulic system to control the ship

4、9;s walking movement of the cutting table, lifting and conveying devices.</p><p>　　The hydraulic system is by the power components (hydraulic pump), control components (hydraulic valve), the actuator (hydrau

5、lic cylinders, hydraulic motors), of auxiliary components (fuel tank, tubing, filters). Each part in the design process to go through the analysis, screening, draw hydraulic system schematic diagram.</p><p>

6、　　Before to determine the hydraulic system diagram to determine the hydraulic actuator in the form of the system of thermodynamic analysis, to determine the system pressure, flow, power and other parameters to develop a

7、basic program, and then draw up the hydraulic schematic diagram, and then in accordance with national standards and select the appropriate hydraulic components, and finally the strength check, write the manual.</p>